You can change them using the User menu of the Administrator menu see page You must install this viewer when you access the main viewer for the first time. When you log in the network camera using ActiveX viewer for the first time by clicking Enter to enter the main viewer , the Security Warning appears. Click Yes and install ActiveX Control. You can use all the functions of the viewer with ActiveX Control.
You can select this viewer when the camera image is in JPEG. The frame rate is lower than the ActiveX viewer. The Java applet viewer operates only when Java is installed and Java Sun is enabled. If it does not operate correctly, check whether the specified Java version has been installed successfully and Java Sun is enabled. Check whether the version of Java displayed for Java Sun is one of the versions specified below.
If Java Sun is not displayed, it means that Java is not installed. You need to install Java. In that case, disable Automatic configuration and set the Proxy server manually. Every page of this software is optimized for display character size Medium for Internet Explorer.
This section explains the functions of the parts and controls of the main viewer. For a detailed explanation on each part or control, see the specified pages. Click to display the Administrator menu. Click to capture a still image shot by the camera and to store it in the computer. When you click this icon, appears and enables you to control pan, tilt and zoom functions from the main viewer.
Select the Preset position name from the drop-down list. The camera will move to the preset position that you have stored in memory using the Preset position menu. Control panel. Click the arrow button of the direction in which you want to move the camera.
Keep it pressed to move the camera continuously. To return to the home position, click. You can select the operation mode of the 8-direction arrow buttons for panning and tilting in PTZ mode of the System menu. Press to zoom out, and press to zoom in. Zooming continues while the button remains pressed. The four edges of the image may be dark depending on the zoom position. This is a phenomenon related to the structure of the camera, and does not cause a problem. To focus on a nearby object, press.
To focus on a distant object, press. By pressing , the focus is set to the optimum position. To control the focus manually, set Focus mode of the Camera menu to Manual. Displayed only when the camera Viewer mode page 46 is set to Full and one or more triggers are enabled in the Trigger menu page Select the function you want to use from the drop-down list and click.
The selected function is activated. The selectable functions are as follows:. The last selected mode is saved in the computer, and will stay selected for the next startup. Displayed when Microphone page 36 is set to On.
Drag the bar to adjust the volume. When you click , the icon changes to and the audio output stops. To output the audio, click again. If does not appear when the Java applet viewer is used, Audio codec may not be set to G. The image shot by the camera is shown here. The date and time is displayed at the top of the window. Click the Frame rate list box to select the frame rate for transmitting the image.
Selectable frame rates are as follows. For example, if you select 30 fps for SNCRXN, the image is sent at the maximum speed of the connected line 30 fps maximum.
The frame rate options indicate the maximum number of frames that can be transmitted. The number of frames actually transmitted may vary depending on network environments and camera settings image size and image quality settings. Auto is determined by the image size specified in the Camera menu page The digital zoom icon changes to.
You can capture an image being monitored as a still image and save it in the computer. The still image of the moment you click is captured, and this still image is displayed in the capture window. Type in File name and specify Save in , then click. When you click , the display switches to. When you cancel the digital zoom, returns to white. If you cannot get the control, the icon switches to and the waiting time is displayed. Click to zoom out, and click to zoom in. To focus on a nearby object, click.
To focus on a distant object, click. By clicking , the focus is set to the optimum position. You can operate the camera direction, zoom, and focus by using the control panel for the monitor image currently displayed. Click on the monitor image, and the camera moves so that the clicked portion is positioned at the center of the display.
Click and hold the left button of the mouse on the monitor image, and drag the mouse diagonally to draw a red frame around the portion you want to enlarge. The camera moves so that framed portion is positioned at the center of the display and is zoomed in. If you want to zoom in further using the digital zoom, specify the area again.
In this case, click the point you want to move to the center. When you have the authorization to control this function, the zoom bar is displayed below the window. You can specify a location to be zoomed by clicking the zoom bar. The zoom bar is either displayed or turned off by clicking below the image frame. When you are not going to use the zoom bar, click under the panorama window to turn it off. Select a preset position name from the Preset position drop-down list.
The camera will move to the preset position that you have stored in memory using the Preset position menu page To rotate the panorama image in accordance with the camera's panning direction, set Panorama mode to Rotate in the System menu of the Administrator menu page The v mark on the panorama image indicates the panning home position. Create the panorama image with the supplied SNC panorama creator. Refer to page 80 for details. The panorama image is a still picture converted from the image taken when you were going to create it with the SNC panorama creator.
When the camera is moved or when the layout around the camera is changed, you should create the panorama image again. The panorama image can be rotated only when a degree panorama image has been created using the SNC panorama creator.
When you are not going to use the panorama image, click under the panorama window twice to turn off the panorama window. You can send a captured still image by attaching it to an e-mail, or to the FTP server. The still image of the moment you click is captured, and your e-mail with the image file attached is sent to the specified mail address. The still image of the moment you click is captured, and the image file is sent to the FTP server.
To use this function, you need to make Alarm output 1 or Alarm output 2 active in the Trigger menu of the Administrator menu page Each click switches the alarm output alternately between On short-circuit and Off open. You can play the audio file stored in the camera using the SNC audio upload tool. To use this function, you need to make Voice alert active in the Trigger menu of the Administrator menu page Playback of the audio file starts and the playback sound is output from the speaker connected to the camera.
In that case, disable the software or select the TCP mode. In that case, select TCP. Multicast streaming page 40 is On. By selecting it, the network transmission load of the camera can be reduced.
The Administrating the Camera section explains how to set the functions of the camera by the Administrator. This section explains the basic operations and each option of the Administrator menu. The setting menus of this unit will clearly display only the setting options that you can currently select.
The grayed out options cannot be selected. Supplied accessories. AC power adaptor 1. Power cord 1. Upper ceiling bracket 1. Lower ceiling bracket 1. Cable cover 1. When You Discard the. For environmental reasons, take out the lithium battery.
Spherical privacy zone masking With Privacy Zone Masking you can mask unwanted or prohibited area within the sight to protect privacy. The masking locks on the designated spot even in PTZ control by 3-dimensionally tracking the position according to PTZ motion. Benefits Pan, tilt and 26x optical zoom The SNC-RZ50 incorporates pan, tilt and 26x optical zoom capability to provide large field of view and a combination of overview and detail.
With a pan and tilt speed of degree per second, you can move to a desired area instantaneously. While JPEG stream can be recorded and monitored locally, where available bandwidth is sufficient, MPEG4 can be transmitted over the Internet even under limited bandwidth.
Previous Page. Next Page. Page 3 Alarm sending Tab — Setting the e-mail sending mode when detecting the alarm Page 7: System Requirements System Requirements These are the requirements for the computer that displays the image or controls the camera. Processor Intel Pentium 4, 1. Page 8: Preparation Preparation The Preparation section explains what the administrator has to prepare for monitoring images after installation and connection of the camera.
Assigning the IP Address to the Camera To connect the camera to a network, you need to assign a new IP address to the camera when you install it for the first time. Page 9 Click on the camera in the list to which you want to assign a new IP address.
The network settings for the selected camera are displayed. Set the IP address. To access the camera directly, double-click the camera name in the list.
The factory setting of the camera network is as follows. IP address: The software installation starts. If the information bar appears, click on the bar and select Install ActiveX Control…. Click OK. When the above procedure is completed, the cameras connected in the local network are displayed in the IP Setup Program. Delete the downloaded file, and click the Setup icon again. The cameras will be displayed in the list. If you want to keep Windows Firewall On, continue with the following steps.
Select Add Program…. Use Internet Explorer as the Web browser. In this case, click Continue to this website not recommended. The welcome page appears in SSL communication. Page Basic Configuration By The Administrator Basic Configuration by the Administrator You can monitor the camera image by logging in with the initial conditions set for this network camera.
You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend you configure the following items before monitoring images from the camera.
The functions of the camera should be set by the Administrator. The welcome page of Network Camera is displayed. Select the viewer. The usable codecs and viewers are displayed depending on the Mode setting in the Video Codec Tab in the Camera menu page The main viewer appears. Note If the welcome page does not start correctly, the security level of the Internet Explorer may be set to higher than Medium. For the verified Java version, contact your authorized Sony dealer. Home Displays the welcome page.
Page Monitor Image You can control pan, tilt, zoom, and focus of the camera. Keep it pressed to move the camera continuously. To return to the home position, click You can select the operation mode of the 8-direction arrow buttons for panning and tilting in PTZ mode of the System menu. Monitoring the camera image Log in to the homepage to display the main viewer.
Select the frame rate only when the camera image is in JPEG. Capturing a monitor image Display the camera image in the monitor window. Click The still image of the moment you click is captured, and this still image is displayed in the capture window. When you click , the display switches to and Preset position list box are displayed on the upper right of the window.
In this case, click the point you want to move to the center or click the arrow button on the image control section. Page Using The Trigger Button The camera is moved to face toward the clicked point, and the present image at the point is displayed in the monitor window. Click the point you The present situation is want to watch in the displayed in the monitor panorama window. Page Controlling Alarm Output 1, 2 To use this function, you need to make Image memory active and set the details in the Trigger menu of the Administrator menu page Display the image on the monitor window.
Select Image memory from the trigger drop-down list. Click The still image of the moment you click is captured, and the image file is recorded. Page Administrating The Camera Administrating the Camera The Administrating the Camera section explains how to set the functions of the camera by the Administrator.
This section explains the basic operations and each option of the Administrator menu. Page Configuration Of Administrator Menu Click this button to invalidate the set values and return to the previous settings.
If the power is turned off immediately, the changed setting may not be stored correctly.
0コメント